HORSEGUARD The Original Electric Tape Fence System
|
|
| How to use the 'Coleman' stripper/crimper tool. | |
COLEMAN STRIPPER/ CRIMPER #CRIMP59
|
Insert the end of the cable into the round cable stripper opening. Leave about 1 inch of
cable past the cutting edge. Close the two sides of the crimper with a Vise -Grip pliers. Hit
the crimper with a hammer against a wood block until both sides of the crimper meet.
Pull off the cable insulation that has been cut. Fold the exposed wire strands over the
cable insulation and insert the terminal over them. Close the two sides with the vise grip
and hit the crimper again. The cable is crimped...
|
|
