The Line Insulator #8N
|
Made out of flexible plastic, it protects the tape from attrition.
After
placing the tape and the cover, push the lower locking pin first,
then squeeze the cover and
then place the top pin in proper hole.
The more you push the pin, the more the tape is
secured. |
The
INSULATOR can also be skewered on to 1/2" diameter fiber glass rod or 1/2"
reebar.
Set the long side of the base up for horse protection. |
The shorter side of the base
should be positioned upward so the tape is as high as possible |
The same Insulator is attached to T-Post with 2 wires.
|
or one (or 2) vinyl straps |
On pipe posts after drilling 2
holes in the metal, the INSULATOR can be secured with 2 Pop rivets. |
Screwed at each post to insure
the proper insulation from the humid wood. |
