T-Post story...
or... How to install the T-Post Guard...
1) Push each sleave segment down over your T-post
2) Inside each segment is a star shaped pattern
that centers the segments
3) Using the T-post as a backbone 5 segments 12" long covers one 5ft T-post
4) There are two different precut holes on each side of the sleeves segments,
5) One on the center, one on the side in order to fit any T-post size
or any position on the T-post.
6) Even if your T-postGuard doesn't touch the ground,
it doen't matter as all the inside stars hold and center the T-postGuard in proper position
7) The cap fits snugly onto the top of the T-post and is secured by the big screw of the insulator
8) Comments from a customer: -" I have transformed my ugly and dangerous T-posts with T-postGuard. Not only are they safe, they are absolutely beautiful !"
9) The insulator is screwed in the center hole
10) The 1.5" tape is gently but firmly fastened onto the insulators
11) Brown like wood plus brown tape to match your surrounding
13) T-post caps have been designed to hold one strand of tape for those
of you who wants to
install only one strand of tape
(#TPC & TPI bags of 25)
100 segments turn 20 dangerous T-posts into decorative 5ft wood like posts, equipped with 5 tape insulators.
