HORSEGUARD The Original Electric Tape Fence System
To avoid poor contacts, rust, sparks, power leakage and all sorts of problems,
HorseGuard recommends the use of this type of connections only.
The double-insulated High tension cable #28M
The #28M cable can take up to 12000 volts
It is double insulated, it connects the charger to the fence.
If the distance is more than
5 ft long use the #28M High Tension
cable (sold by the foot) + a #59GM
connector.
| 28M | Brown H.T. CABLE /ft | | Brown |
0.37 |
|
 |
| 28V | Green H.T. CABLE /ft | | Green |
0.37 |
|
|
Connector #59GM
Make the connection using the connectors #59GM, that you will crimp onto the end
of the #28M cable. By hooking the top part of the #59GM onto the buckle of the #36W
you will create a perfect contact with no power leaks and no bad contact spots
that would generate sparks and damage the tape.
| 59GM | Connector for #28M | | from buckle to wire |
2.95 |
|
|
Crimp your own #59GM with your pliers, |
OR
Ask HorseGuard to do it for you at your desired length. |
OR
Do it yourself with the Coleman Crimper #CRIMP59. |
Want to do all your High tension connections yourself ? Order a Crimper tool:
| CRIMP59 | Crimper tool | | |
12.05 |
|
|
Inter Connector Wire #59H
2 ft #28M + 2x #59GM
It transfers the power
from one strand to the
next one. The connectors
included at each end of
the 59H are attached
onto the buckles of #36W
or #36M Tensioners to
ensure a solid electrical
contact.
| 59H | Inter connector wire | | top to bottom strand |
6.89 |
|
|
|
Fence Charger Connector Wire #59L
5ft #28M + 1x #59GM
It carries
the electric
current
from the
charger to
the tape.
| 59L | 5ft Charger Connector Wire | | fence to charger |
4.89 |
|
|
|
ELECTRIC FENCE TESTERS
| TS5 | Digital Fence Tester | | |
22.00 |
|
|
|
