THE TENSIONER #36W & #36M

THE TENSIONER #36W & #36M

The #36W for wood post and the #36M for metal post are the same tensioners but they come with different attachments.

Advantages of setting a tensioner as a corner insulator:

• • Easier to adjust the tension of the tape from one corner to another.
• • The buckle redistributes the current at each corner so that the 10 stainless-steel wires get the same voltage.
• • The buckle #36N keeps the tape from wriggling inside the Corner Insulator and therefore prevents its deterioration.

These tensioners are not to be used with the Bi-Polar system because they would immediately short out the charger by creating a contact between the positive and the negative poles .
But in case you plan to use the Bi-Polar tape as a traditional fence with a ground rod, it would be then possible to use them.

36N

Tensioner buckle

buckle alone

3.90

To install a tensioner at the corners and at the gate:

1. Make a straight line at 10 inches above ground by stretching a string between the end-posts.
2. Install the tensionners on each end post using the straight line as a guide for the level of the fence tape.