All the Bi-Polar Basic items

Gate handle #11XP

The Bi-Polar gate handle #11XP being insulated does not carry the electric pulse to the other side of the gate. Screw the special pig tail onto the post and hook the gate handle onto it. The fence does not need to make a full circle to work.
The circuit is completed when the horse touches the fence. The clip n°13 will hold the tape in place to avoid shorts between the 2 poles (+) and (—).

11XP

Bi-Polar Gate Handle

9.05

Bi-Polar gate kit #BP12

BP12

Bi-Polar Gate Kit (10ft)

24.00

The Conductive and Stretchy Horseguard Bi-Polar gate kit #BP12
It is 10ft of extendable tape attached and squeezed in a new gate handle concept. We have created a Bi-Polar gate kit that fully respects the bi-polarity of the tape and conducts the electric current from one side to the other of the gate.
No more need to dig a trench under the gate and run two high-tension cables through a garden hose! No more spring needed in the gate handle. All the spring you need is now in the tape. The circuit is closed when you hook the handle to the lugs of the tensioner #9bl at the gate post.

Download and print the "How to install the conductive & stretchyHorseguard Bi-Polar gate kit #BP12"

Splicer buckle #BP34

It joins 2 ends of Bi-Polar tape together.The positive and negative edges of the tape are not in contact.

BP34

Bi-Polar Splicer Buckle

2.80

Double high tension cables #28M #28V		#BP59H

2 different colors In order to prevent shorting out the system. Green up- brown down. Sold by the foot.		A pair of 2 ft Bi-Polar green / brown jumper wires + lugs)