HORSEGUARD The Original Electric Tape Fence System
Typical Bi-Polar Fence Layout
- Brown/Green Tape - #BP1640 - 1640ft spool of bi-polar tape (or White)
- Line insulator #8br - One per strand of tape /per post.
- Tensioner #9bl - One per corner /per strand
- 3 Ways connection #9bl ->(= 3 way tensioner)
- Gate handle #11XP - One per strand of tape.
- Splicing the tape #9bl - One per spool of tape
- Brown High tension cable/ft #28M
- Green High tension cable
- Bi-Polar Tensioner #9bl + connectors (Lugs 2-4 per tensioner)
- Warning signs #42 - One per 300 ft of fence
- Fence Switch #52XP
- Fence Charger #FC500
- Keeper Clip #CLIPbr ( 1/gate handle)
- 2 Bi-Polar jumper cables(2ft)+lugs #BP59H ( 1/gate handle)
- Bi-Polar Little light in the prairie #15BP ( 1/gate handle)
Click on the #ref below to see an image:
HorseGuard Bi-Polar Fence Layout.
We offer two types of low impedance fence chargers, they are made
in USA, weatherproof, specially designed for Horseguard.
2 Year Warranty by the Manufacturer
Serviced directly by the Manufacturer.
They should not be put on the ground
#FC500 -A Plug in Charger 110/120 volt,
that will ensure 7000 volts on a 3 miles fence.
|
|
| FC500 | Fence Charger | 220.00 |  |  |
|
#FC6S -A Solar Charger 6 volts,
that will ensure 7000 volts on a 3 miles fence.
A solar charger is made for sunny places, it has to be exposed
towards south. Within a period without sun the charger will last
is about 2/3 days.
The plug has been added to correct the lack of sun, so you can
recharge the box directly, for 2 or 3 hours ONLY and put it back onto the fence.
IT IS NOT MADE FOR CONTINOUS PLUG-IN AT ALL.
|
|
| FC6S | Fence charger 6V-Solar | 285.00 | | |
|
|
