To Install the Tape from A to B

Install one mile of HorseGuard Tape in less than 30 minutes !

Tensionning the tape in one go

Step 1 : Attach the tape to buckle N°1


Make a loop with the tape. Push it through the buckle. Insert the tang in the loop	Pull the end of the tape

To lock it, go again through the stainless steel buckle	Secure the tail with the clip :

Unrolling the spool of tape:

Unroll the tape to
the next tensioner #36W

Pull the WHOLE tape by hand
(even a mile of tape is easy to pull)

Step 2 : Attach the tape to buckle N°2

Set the tape in the #36W buckle.
Pull and set the definitive tension of your fence from one tensioner #36W to the next #36W.
Cut the tape 8" from the buckle
Secure the tail with the clip

Step 3 : How to secure the tape into the new #8 insulators

TO RE-TENSION THE TAPE

To retighten the entire fence line
turn all the #8 pegs to the left to free the tape, then pull the tape out at the tensioner adjust to the correct tension, and finish by closing the #8 pegs.

To retighten post after post
turn one #8 peg to the left to free the tape, pull out the portion of tape you want to strech and secure it with the #8 pegs and proceed again at the next post.

To loosen the Tape


Take the tail of the tape out of the buckle.	and slacken the fence tape by pushing it with the palm of your hand. It will simply get loose.

[ Prev. ] [Index]

Our Websites around the world
Contact HorseGuard

[Index][Next]

HORSEGUARD
2283 Cornell Avenue,
Montgomery IL, 60538 USA
phone: 1-888-77-FENCE
(1-888-773-3623)
phone: 630-551 0053 fax: 630 551 0058