Typical layout (HG traditional Tape)

9 out of 10 HorseGuard Fences
are built the same way
and need the following items:

1. Tape - #Z4, #H4, #G4 - 820ft spool of tape
2. Line insulator # 8 - One per strand of tape /per post.
3. Tensioner # 36W - One per corner /per strand
4. T buckle #36T + Tensioner #36W ->(= 3 way tensioner)
5. Gate handle #11 - One per strand of tape.
6. Splicer buckle #24 - One per spool of tape
7. High tension cable /ft #28M From charger to fence
8. Connector #59G. One at the end of the cable # 28M
9. Interconnector wire #59H One for 2 strands, 2 for3 strands
10. Warning signs #42 - One per 300 ft of fence
11. Fence Switch #52- Power On and Off
12. Ground Rod #GR5 (more than one in dry ground)
13. Fence Charger (minimum 1 Joule output)
14. Keeper Clip (2 /splicer, 1/gate handle)

Click on the #ref below to see an image:

• A Plug in Charger #FC500 110/120 volt, 5 Joules output.
• A 12 volts Charger #FC12V , 5 Joules output, rechargeable.
  and soon available a Solar Charger #FC6S

Our web site can make for you an instant quote, including all necessary items.
(Click the button above)